Unit weight of steel bars: (8mm, 10mm, 12mm, 16mm and 20mm) - Civil Sir (2023)

steel unit weight | steel bar unit weight | unit weight of steel per meter | unit weight of steel per foot | single weight steel 8mm | single weight steel 10 mm | single weight steel 12 mm | single weight 16mm steel | single weight steel 20 mm | Specific weight of steel according to IS code | Steel Bar Unit Weight Formula | Unit weight of steel in kg/m | Unit weight of steel in kn/m3.

Steel, also known as rebar or reinforcing bars embedded in concrete elements to increase their tensile strength. As we know, steel is used to form structural members such as columns, beams, foundations, footings and building slabs. Various sizes of steel bars are supplied by the supplier in lengths of 12 meters or 40 feet.

The unit mass of steel or rebar is the ratio between the weight of the steel and its unit volume. It is usually expressed in kilograms per cubic meter (kg/m3) or pounds per cubic foot (lb/ft3). The unit of mass for steel is 7850 kg/m3 (kilograms per cubic meter) or 490 lbs/ft3 (pounds per cubic foot).

Unit weight of steel: The unit weight of steel is defined as the ratio between the weight of steel and the unit volume of steel, the unit weight of steel is usually measured in kg per cubic meter and is 7850 kg/m3, measured in kN per cubic meter is 78.5 kN/m3 or measured in grams per cubic centimeter is 7.85 g/cm3 which is roughly equivalent to pounds per cubic foot is 490 lbs/ft3 or measured in pounds per cubic yard is 13,231 lbs/ yd3.

Typically, the diameter of steel rods is 8 mm (2.5 soot), 10 mm (3 soot), 12 mm (4 soot), 16 mm (5 soot), 20 mm (6 soot), 25 mm ( 8 soot), 32 mm etc. or U-bend lengths of 12m or 40ft.

In this article, we read about the unit weight of 8mm, 6mm, 10mm, 12mm, 16mm, 20mm steel bars and more. And read about the unit weight of steel per meter, per foot, in kg/m3, kn/m3 and the volume of round steel. And read steel weight bar, steel weight formula, derivation d2/162, different sizes of steel bars, 8mm steel weight per meter, 10mm steel weight, 12mm steel weight, weight of 16 mm steel bar and 20 mm steel weight.

(Video) How many Numbers of TMT Bar in a Bundle | How to Calculate Weight of Steel Bar Bundle at Site

The unit weight of steel is defined as the ratio between the weight of the steel and its unit volume, the weight of steel is measured in kilograms (kg) and pounds (lbs) and its volume is measured in cubic meters (m3) and feet. cubic (ft3). Then its unit weight = unit mass/unit volume, represented as W = m/V, where W is the unit weight of the steel, m is the mass, and V is the volume. It is also known as specific gravity of steel or density of steel and its SI unit is kilogram per cubic meter (kg/m3). Steel is the most used element in civil engineering for construction. Once the unit weight of steel is known, it is easy to calculate the amount of steel needed for projects.

unit weight of steel bars

The mild steel unit weight is assumed to be 7850 kg/m3 or 78.5 kN/m3 or 7.85 g/cm3 or 490 lbs/ft3 or 13,231 lbs/yd3. Steel bars are mainly used as reinforcement to reinforce concrete structures.

Unit weight of steel bars: (8mm, 10mm, 12mm, 16mm and 20mm) - Civil Sir (1)

Unit weight of steel per meter:- The unit weight of 6mm steel bar is about 0.222kg per meter, 8mm steel bar 0.395kg per meter, 10mm steel bar 0.617kg per meter, 12mm steel bar 0 .89 kg per meter 16 mm steel bar 1.58 kg per meter 20 mm steel bar weighs 2.47 kg per meter 25 mm steel bar weighs 3.86 kg per meter 32 mm bar weighs 6.32 kg per meter and 40 mm steel bar weighs 9.87 kg per meter.

unit weight of steel per foot:- The unit weight of 6mm steel bar is about 0.067kg/ft, 8mm steel 0.120kg/ft, 10mm steel 0.188kg/ft, 12mm steel 0.270kg per foot, steel 16 mm steel 0.480 kg per foot, 20 mm steel 0.751 kg per foot, 25 mm steel 1.174 kg per foot and 32 mm steel 0.751 kg per foot 1925 kg per foot.

Bar weight per package: 12 mm 10 mm 8 mm 16 mm 20 mm 25 mm Steel bar

Bar weight per piece: 12mm, 10mm, 8mm, 16mm, 20mm and 25mm steel bar

(Video) What size/ diameter is #2, 3, 4, 5, 6, 7, 8, 9 & 10 rebar | what is rebar diameter

Steel unit weight:- The unit weight of steel is defined as the mass per unit length, when the weight of rebar/rebar is measured in pounds per foot, it is known as the unit weight of rebar in pounds/foot.

Unit weight of steel in pounds per foot:- The unit weight of #2.5 rebar or bar is 0.265 lb/ft, #3 rebar can be 0.376 lb/ft, #4 rebar can be 0.668 lb/ft, #5 rebar can be 1043 lb/ft, #6 rebar can be 1502 lb/ft, #7 rebar can be 2044 lb/ft, #8 rebar can be 2.67 lb/ft, #9 rebar can be 3.40 lb/ft, #10 rebar could be 4,303 lb/ft and #10 rebar could be 4,303 lb/ft. #11 could be 5,313 lb/ft.

◆You can follow meFacebookand sign ourYouTubeCanal

Unit weight of steel in kg/m3:- 7850 is the unit weight of steel in kg/m3, which means that measured in cubic meters, 1 m3 of steel weighs approximately 7850 kg. Thus, 7850 kilograms per cubic meter is the unit weight of steel in kg/m3.

Unit weight of steel in kN/m3:- 78.50 is the unit weight of steel in kN/m3, which means that measured in cubic meters, 1 m3 of steel weighs approximately 7850 kN. Thus, 7850 kilonewtons per cubic meter is the unit weight of steel in kN/m3.

(Video) Weight Calculation of Steel Bar | Tmt weight Calculation #howtocalculateweightofsteel

Unit weight of steel in N/mm3:- 7.85 × 10^-8 is the unit weight of steel in N/mm3, which means that, when measured in cubic millimeters, 1 mm3 of steel weight is approximately 7.85 × 10^-8 N. Therefore, 7850 × 10^-8 Newtons per cubic millimeter is the unit weight of steel in N/mm3.

Unit weight of steel in kg/ft3:- 222 is the unit weight of steel in kg/ft3, which means that 1 ft3 of steel weighs approximately 222 kg when measured in cubic feet. Therefore, 222 kilograms per cubic foot is the unit weight of steel in kg/ft3.

Unit weight of steel in lb/ft3:- 490 is the unit weight of steel in lb/ft3, which means that 1 ft3 of steel weighs approximately 490 pounds when measured in cubic feet. Therefore, 490 pounds per cubic foot is the unit weight of steel in lb/ft3.

Unit weight of steel in g/cm3:- 7.85 is the unit weight of steel in g/cm3, which means that 1 cm3 of steel weighs approximately 7.85 grams when measured in cubic centimeters. Thus, 7.85 grams per cubic centimeter is the unit weight of steel in g/cm3.

Formula for the unit weight of steel bars:- There are two formulas to calculate the unit weight of steel, 1) D^2L/162 and 2) D^2L/533. The steel bar formula D^2L/162 is used to calculate steel weight per meter, e.g. B. Unit weight of 8 mm diameter steel = (8 × 8 × 1) ÷ 162 = 0.395 kg/m. The formula for steel bars D^2L/533 is used to calculate the weight of steel per foot, for example, the unit weight of 8 mm diameter steel = (8 × 8 × 1) ÷ 533 = 0.12 kg /foot.

Unit weight of steel 6 mm:- The unit weight of 6 mm diameter steel bars or rods is approximately 0.222 kg per meter, which is equivalent to approximately 0.0676 kg per foot. A 6 mm diameter steel bar that is 12 meters long weighs 2.664 kg.

(Video) Calculate the weight of Steel bar | सरिया का वजन बिना तोले निकाले | weight of Steel bar

8 mm steel weight:- The unit weight of 8 mm diameter steel bars or rods is approximately 0.395 kg per meter, which is equivalent to approximately 0.12 kg per foot. An 8 mm diameter steel bar that is 12 meters long weighs 4.74 kg.

10 mm steel weight:- The unit weight of 10 mm diameter steel bars or rods is approximately 0.617 kg per meter, which is equivalent to approximately 0.188 kg per foot. A steel bar 12 meters (40 feet) long and 10 mm in diameter weighs 7407 kg.

12 mm steel weight:- The unit weight of 12 mm diameter steel bars or rods is approximately 0.889 kg per meter, which is equivalent to approximately 0.27 kg per foot. A steel bar 12 mm in diameter and 12 meters long weighs 10.667 kg.

Steel weight 16mm:- The unit weight of 16 mm diameter steel bars or rods is approximately 1.58 kg per meter, which is equivalent to approximately 0.48 kg per foot. A steel bar 12 meters long and 16 mm in diameter weighs 18.96 kg.

20 mm steel weight:- The unit weight of 20 mm diameter steel bars or rods is approximately 2.47 kg per meter, which is equivalent to approximately 0.752 kg per foot. A steel bar 12 meters long and 20 mm in diameter weighs 29.62 kg.

Unit weight of steel according to IS code:- As per IS Code and Indian Standard, unit weight of mild steel is considered to be 7850 kg/m3 or 78.50 kN/m3 or 7.85 g/cm3 or 490 lbs/ft3 or 13,231 lbs/yd3.

(Video) Rebar weight per foot | weight of number 3, 4, 5, 6, 7, 8, 9 & 10 rebar per foot

Conclusions:-
The unit weight of structural steel bars or rods is assumed to be 7850 kg/m3, 78.50 kN/m3, 7.85 g/cm3, 490 lbs/ft3 or 13,231 lbs/yd3.

Videos

1. How to Calculate the weight of I-Beam?
(Civil Engineer Deepak Kumar)
2. Steel bar hooks size / #hooks #construction
(Engineer Boy)
3. How to Calculate Percentage Cross-Sectional Area of Reinforcement Bar in Column as per IS 456:2000
(Learning Civil Technology)
4. Weight of Steel bars for different diameters Calculations @Krishna Ceans
(KRISHNA CEANS)
5. How To Calculate Weight Of Steel Bar in kg/ft and Pound/ft
(Civil Engineers)
6. How to Calculate the Weight of One Bundle TMT Steel Weight of 1 Bundle Steel bar
(Civil Engineering Pedia)
Top Articles
Latest Posts
Article information

Author: Kelle Weber

Last Updated: 02/11/2023

Views: 6316

Rating: 4.2 / 5 (73 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Kelle Weber

Birthday: 2000-08-05

Address: 6796 Juan Square, Markfort, MN 58988

Phone: +8215934114615

Job: Hospitality Director

Hobby: tabletop games, Foreign language learning, Leather crafting, Horseback riding, Swimming, Knapping, Handball

Introduction: My name is Kelle Weber, I am a magnificent, enchanting, fair, joyous, light, determined, joyous person who loves writing and wants to share my knowledge and understanding with you.